Check the locknuts on the top roller cylinders are secure

WHAT YOU NEED 

Tools:Security Torx Key Set24-mm Spanner

Safety Equipment:Standard Personal Protective Equipment

  1. Press the E‑stop button on the operator console.
  2. Isolate the saw pneumatically.
  3. Remove both feeder transparent covers.
  4. Lift the top clamp rollers by hand to give access to the locknuts on the top roller cylinders.
  5. Using a 24-mm spanner, attempt to tighten each one of the four locknuts to make sure they are secure.
  6. Refit both feeder transparent covers.
  7. Turn on the pneumatic isolation switch on the pneumatic unit.